Understanding what type of welder, you need assures you can use it. Considering the power source is something that many welders don’t take into consideration until its too late. MIG welders operate off two different types of power including 110v and 220v with some models being dual voltage MIG welders.

If you have a 110v power outlet then taking the time to understand the Top 5 110v MIG welders of 2018 – 2019 is a must, and we’ve taken the liberty of breaking down the best options this year.


1. Lincoln Electric K3963-1 Powermig 210 Mp – 9.5

Lincoln Electric K3963-1 Powermig 210 Mp Review

9.5/10

Pros

  • Extremely durable build quality
  • Simple to operate even for novice users
  • More powerful than it looks
  • Compact and lightweight
  • Perfect weld and minimal spatter

Cons

  • Some users noted problems with the feed wire
  • Expensive

Lincoln Electric starts this review off like they’ve started off so many others with this Powermig 210 Mp which deserves the 9.5 out of 10 rating. The versatility of this welder goes well beyond the dual voltage capability for use in both 120v and 230v outlets as it offers as compact, lightweight design which makes it extremely portable.

The Powermig 210 comes in at just 40 pounds and features a simple, yet intuitive push-and-turn digital control system. This makes it simple to adjust and helps with the entire setup process making it simple even for novice users. For intermediates, there’s advanced features built-in which are easily accessible and allows you to control your weld.


Check Best Price


2. Lotos MIG140 140 Amp MIG Wire Welder Flux Core Welder – 9.0 B00S8R1ST4

Lotos MIG140 140 Amp MIG Wire Welder Flux Core Welder Review

9.0/10

Pros

  • Simple setup in under 10 minutes
  • Inexpensive
  • Lightweight and compact
  • Versatile, can be used with or without gas
  • Heat protection built-in keeps it from overheating

Cons

  • Does not include a spool gun
  • Gas hose connection put in bad location

If you’re looking for more power, the Lotos MIG140 gives you flux core welding at 140-amps. Fit to use in 110v outlets makes it convenient with traditional household electricity, but where this MIG really stands out is the price. At under $400 you’re getting a heck of a bargain and the perfect option for welding steel, stainless-steel and aluminum on a budget.

For a 110v MIG welder it compares with higher-end models. The max welding capacity for stainless-steel comes in at 18 Gauge 3/16-inch, mild-steel 18 Gauge 3/16-inch, and 1/8-inch and thinner for aluminum. Other features include a 2T/4T switch, two digital displayers, and a newly designed ground cable which makes it easier to switch from positive to negative.


Check Best Price


3. Hobart 210 Handler MVP MIG Welder – 8.9

Hobart 210 Handler MVP MIG Welder Review

8.9/10

Pros

  • Handles 1/4-inch welds with ease
  • Features a durable cast iron feed system
  • Simple to setup the spool gun
  • No tools required for the drive roll system
  • Simple to use and set up, even for novice users

Cons

  • Heavy welder, recommended to get the optional cart
  • Does not include the spool gun which is about $200

The Hobart 210 Handler is a great little MIG welder that works off 110v electricity and is available in four options with pliers, gel, and gel and pliers. Each package offers its own price point, but all four options are a great deal for the money. This 210-amp MIG welder is all you need for DIY projects which includes an exceptional job welding steel 24 ga. to 3/8 in. steel in a single pass.

The Hobart 210 is both 115v and 230v giving you dual voltage capability and includes the universal MVP plug to make it all happen. This model features 7 voltage setting allowing you to customize your weld for superior results and with a duty cycle on 115V 20% @ 90 amps and 230V 30% @ 150 amps you’ll have more uptime than most.


Check Best Price


4. Lincoln Electric K2278-1 Handy Core MIG – 8.5

Lincoln Electric K2278-1 Handy Core Review

8.5/10

Pros

  • Compact and lightweight
  • Great price
  • Durable build quality, especially considering the price
  • Easy to setup even for novices
  • Great performance for smaller projects

Cons

  • Too basic for heavy-duty projects
  • No option to use gas

Lincoln Electric introduced a great 110v MIG welder which is extremely affordable. For a Lincoln model at this price you’re getting a whole lot of welder for not very much highlighted by a 45-pound frame making it extremely lightweight. For versatility, this welder can flux core and MIG weld and can weld steel to up to 1/8-inch.

The Handy Core MIG scores an 8.5 out of 10 and plugs into conventional 115v household current on just a 20-amp outlet. This means you won’t have to perform any upgrades before getting started and for beginners this MIG is very simple to use. Lincoln made this model lightweight and compact and throws in a 1-year manufacturer warranty to give you piece of mind.


Check Best Price


5. Pro-Series MMIG125 125 Amp Fluxcore Welder Kit – 8.2

Pro-Series MMIG125 125 Amp Fluxcore Welder Kit Review

8.2/10

Pros

  • Does not work on gas without an optional attachment
  • Tips can be replaced
  • Despite its compact size is highly durable
  • Long ground wire
  • Great value for the money

Cons

  • No DC output
  • Can be costly to add a gas attachment

Rounding out this review of the best 110v MIG welders is a flux core model from Pro-Series. This 125-amp MIG is the complete kit which includes ground cable, clamp, welding machine, brush, hammer, and a spool of flux core wire. Out of the box, setup is simple and only takes minutes and is a highly recommended MIG for beginners.

The MMIG125 is a great bargain and is highlighted by continuous welding for roughly 2 minutes straight. Performance is better than comparable models coming in with a max thickness of 18 gauge to 3/16-inch in a single pass for mild-steel and has an above average duty cycle of duty cycle of 20% @80A. For the price, this Pro-Series Fluxcore MIG is a great deal.


Check Best Price

Conclusion

If you’re intending on picking up one of the above 110v MIG welders, be sure to come back and share your experience with the rest of the community. For comments you can leave them below and if you have something to add don’t be afraid to let us know.